October 16, 2013

How to Make Faux Leather Book Covers

In an earlier post, I mentioned how I'm trying to get along artistically using up my stash and not buying anything new if I can help it. Just like most artistically inclined people my stash can get overwhelming as we keep acquiring materials with a lot of potential but never get to as many projects as we wish we could. It's my goal to use up my stash.

This was a project I did with other people so not all of the photos are of the same book but they should do good enough for illustrative purposes.  The original instructions can be found here: Creepy Books.








We were making books for Halloween so I chose to make a new cover for the first Harry Potter book and a second smaller book, intending to serve as "Tom Riddle's Diary," which I plan to make into a sketchbook. I decided to make a dust cover instead of working directly on the cover.

Supplies:

-Cardboard or bristol board. 
-Paint: I used a cheap glossy acrylic.
-Paper Towels or Tissue Paper. I used paper towels with a lot of texture to give it a snakeskin look.
-Craft Glue that dries clear.
-Water

1. Open your book, making sure there are an even number of pages on each side to ensure the spine lays flat. Trace around your book leaving a 1/4 inch border around it at the top and bottom and 2-3 inches extra on the sides to make the flaps.  


2. Cut out cardboard shapes and  glue them to your cover. I used a tacky glue designed for use on t-shirts so the glue/water mixture in the next step wouldn't dissolve it.

3. Mix your glue with an equal amount of water. Tear up your paper towel into 3 to 4 inch pieces. Make sure you overlap your pieces and paint over them with the glue mixture.


4. Place a piece of paper towel on your cover and use a large paintbrush to brush your glue mixture over the paper towel piece. Overlap paper towel pieces and work until the cover is filled, making sure to leave 1/2 inch around the outside to overlap to the inside of the cover. If you want wrinkles in you book make sure to scrunch the paper towel pieces a little. Dry with a hairdryer or leave to dry overnight.


5. Turn your cover over and use the glue/water mixture to wrap the extra paper towel over the top and secure it to the inside. Let dry again.


6. Apply your paint. The original instructions stated to paint while the paper towel was still wet. I had much better luck letting it dry and applying a glossy paint to mimic a leather shine. Let your paint dry. If you want to include gold or silver elements, spray paint can be sprayed on plastic plate and applied with a cotton swab.


7. When dry, you can use something pointy to trace gently around your cutouts to make them stand out more against the background. 


I'll do a separate post when I finish the Harry Potter book. This is an incredibly easy project and looks great. This also might have reenacting uses an alternative to the covers I normally use while reenacting.
 

6 comments:

  1. YOU ARE SO COOL, AND I AM SO DOING THIS!!!!!! (she shouted)

    ReplyDelete
    Replies
    1. It's so easy and you'll be able to make some really amazing things. I was so excited with my results.

      Delete
  2. The diary really was awesome, I can't wait to see the other one finished. I hope you keep working on it!

    ReplyDelete
    Replies
    1. The other one will be more of a challenge but I can't wait to see the finished results either!

      Delete

Tell me what you think!

Copyright © 2008-2020 Stephanie Ann Farra. All rights reserved.

All materials posted on this site are subject to copyrights owned by Stephanie Ann Farra. Any reproduction, retransmissions, or republication of all or part of any document found on this site is expressly prohibited, unless the author has explicitly granted its prior written consent to so reproduce, retransmit, or republish the material. All other rights reserved.